Pro-face PL-6700 Series, User Manual

Page: 33 / 97

3 - 2
PL-6700 Series User’s Manual
Optional Units and Expansion Boards
Commercially Available Products
Product Description Installation Area
PCI/ISA Bus
compatible
board In all PL-6700 units, slots 1 and 2 can accommodate
boards up to 163mm long. Slots 3 and 4 can
accommodate boards up to 250mm long.
■
All PL-6700 slot heights are 122mm. When using
the full-sized cover, be sure to use boards that are
no more than 338mm long in slots 3 and 4.
Into the PL's expan-
sion slots.
<Expansion Slot’s Width and Power Supply>
• Check that your expansion board’s “foot” matches the width of the expansion slot.
Slots 1 and 4 are 20 mm wide, and slots 2 and 3 are 25 mm wide. Be sure the width
of your expansion board’s width matches that of the intended slot.
• Since the PL does not supply -5 and -12 V current, ISA(AT)-bus compatible boards
requiring -5 or -12 volts can be used only if the optional PL-PW100 power supply
is installed.
<Commercially Available Boards>
• Certain commercially available boards may not be compatible with Digital’s
PL unit. Installing incompatible boards may result in either damage to or
failure of the PL and will void your warranty.
<PCI Bus>
• Within the entire range of PCI buses currently available on the market, there
may certain devices which will not operate when used with the PL-6700. Prior
to the use of any PCI Bus, be sure to contact your local PL distributor.
<Main Memory>
• Be sure to use only DIM modules manufactured by Digital. Installing other
DIM modules may result in either damage to or failure of the PL, and will
void your warranty.
<When using Standard PC Peripheral Devices>
•
Within the range of peripheral devices currently available on the market, there
may certain devices which will not operate correctly when used with the PL-
6700. Prior to using any peripheral device, be sure to confirm that it will
operate normally with the PL. Installing incompatible boards may result in
either damage to or failure of the PL and will void your warranty.
^
^
Insertion direction
Length
Height
2
Since the steel attachment plate for the board is longer than the board
(Height
1
), be sure to measure the board’s height from Height
2
Height
1
(including
attachment
plate)
Attachment
Plate