Pro-face AGP3500-L1-D24, Replacement Manualbook

Page: 44 / 46

44/46
Chapter 5 Appendix
5.1 Changing the setting of the external media to use
If a CF card is used for GP/ST-3500 series, after the display unit type of the project file
is changed to GP-4500 series, “a CF card” is automatically replaced with “a SD card”
for the external media setting.
(1)
After conversion of the project file data, at GP-Pro EX Error Check, if the message,
“The project contains features that require a SD card. However, the selected
display does not support SD cards so these features will not run.” appears,
<Cause>
The model without a SD card slot has the setting that uses a SD card.
->
Solution 1
(2) To use a USB flash drive instead of a SD card -> Solution 1
(3) To check or change the SD card’s data output destination folder setting
->
Solution 2