Chapter 4 Settings
4-7
Pro-eView
Limits the access to Pro-eView.
This setting is disabled with AGP-3301/3302 Series units. The default setting
is [Allow access from all IP].
•
Allow access from all IP
Access is not limited. Access from all IP addresses is granted.
•
Allow access only entered IP
Only access from registered IP addresses is granted and access from other IP addresses is rejected.
•
Reject access only entered IP
Only access from registered IP addresses is rejected and access from other IP addresses is granted.
Setting procedure
(1)
In the [Settings] menu, touch the [Offline] tab.
(2)
Touch the [Pro-eView] icon.
(3)
Select the type of access limitation After selecting [Allow access only entered IP] or [Reject access only
entered IP], click the [List] key to go to the [List of entered IP address] screen and specify the IP
address(es) to register.
•
Only when Pro-Designer is set to [Use Pro-eView] are these settings enabled. For details, refer to
[Pro-Designer Online Help].
Summary of Contents for AGP-3300 Series
