Pro-face AGP-3300 Series, User Manual

Page: 6 / 89

5
LCD Panel Usage Precautions
• The LCD panel's liquid contains an irritant. If the panel is damaged and any of this liquid contacts your skin, immedi-
ately rinse the area with running water for at least 15 minutes. If the liquid gets in your eyes, immediately rinse your
eyes with running water for at least 15 minutes and consult a doctor.
• The AGP unit's LCD screen may show unevenness in the brightness of certain images or at some contrast settings.
This is an LCD characteristic and not a product defect.
• The AGP unit's LCD screen pixels may contain minute black and white-colored spots. This is an LCD characteristic
and not a product defect.
• The color displayed on the AGP unit's LCD screen may appear different when seen from outside the specified viewing
angle. This is an LCD characteristic and not a product defect.
• When the same image is displayed on the AGP unit's screen for a long period, an afterimage may appear when the
image is changed. If this happens, turn off the AGP, wait 10 seconds and then restart the unit. This is an LCD charac-
teristic and not a product defect.
• To prevent an afterimage:
• Set the AGP unit's display OFF feature when you plan to display the same screen image for a long period of time.
• Change the screen image periodically and try to not display the same image for a long period of time.
Do not operate or store the AGP in locations where it can be exposed to direct sunlight, high tempera-
tures, excessive dust, moisture or vibration.
Do not operate or store the AGP where chemicals evaporate, or where chemicals are present in the air.
Corrosive chemicals: Acids, alkalines, liquids containing salt
Flammable chemicals: Organic Solvents
Do not use paint thinner or organic solvents to remove dirt or oil from the AGP unit's surface. Instead, use
a soft cloth moistened with a diluted neutral detergent.
Do not use or store the AGP in areas with direct sunlight, since the sun's ultraviolet rays may cause the
LCD's quality to deteriorate.
Do not store the AGP in an area where the temperature is lower than that recommended in the AGP unit's
specifications. Doing so may cause the LCD display's liquid to congeal, which can damage the LCD. Also,
if the storage area's temperature becomes higher than the specified level, the LCD's liquid may become
isotropic, causing irreversible damage to the LCD. Therefore, only store the AGP in areas where tempera-
tures are within the AGP unit's specifications.
After turning OFF the AGP, be sure to wait a few seconds before turning it ON again. The AGP may not
operate correctly if it is restarted too quickly.
Due to the possibility of unexpected accidents, be sure to back up the AGP unit's screen data regularly.