WWW.PRO-DIG-USA.COM
4.
DOS AND DON’TS
1.
Ensure the USB cable is attached between the tablet and the black box mounted to
the back of the tablet prior to connecting the tablet to the Intelli-Tork device.
2.
Verify that the Hub Serial No. matches the Serial No. stamped on the Intelli-Tork
in use.
3.
Do not power off the tablet prior to disconnecting from the Intelli-Tork.
4.
Always disconnect from the Intelli-Tork when finished. This is to be treated as a
power off procedure.
5.
Do not carry or hang by the USB cable.
6.
Do not remove the black box mounted to the back of the tablet.
7.
Do not attempt to disassemble the Intelli-Tork unit in any way without communi
cation with supplier.
8.
Ensure that the torque and thrust parameters are zeroed prior to connecting a
helical pile.
9.
Backup data/sync to cloud dialy to prevent loss.
10. Ensure calibration is up to date prior to starting your job.
