Pro-dig Intelli-Tork H200 Instruction Manual Download Page 3

Page: 3 / 16

WWW.PRO-DIG-USA.COM

785.856.2661

WARRANTY WILL BE VOID IF ANY COMPONENTS OR ACCESS COVERS ARE

REMOVED FROM THE INTELLI-TORK DEVICE.

INTRODUCTION INTELLI-TORK CLOUD USER MANUAL

(Note: The information provided within this document is applicable to all Intelli-Tork Cloud Systems.)

There is no power button on the Intelli-Tork hub. Once the user disconnects from the hub,

it will enter sleep mode awaiting connection. Operators must ensure proper disconnection

from the hub to maintain maximum battery life.

The battery life of this system has been designed to exceed 10.5 month of usage running 10

hours a day, 5 days a week in -20° F. Battery replacement will occur automatically during your

yearly calibration.

Communication range for the Intelli-Tork System is 300’ line of sight. Note that obstructions

may diminish the communication range.

Intelli-Tork Hub Operating Temperature Range: -30° F to 130°F

The Intelli-Tork hub has been tested to 12’ submersion depth for 24 hours. At no time should

the hub be subjected to pressurized wash down. The hub should be cleaned with water and

mild detergent as required.

Summary of Contents for Intelli-Tork H200
















