4
III.- INSTALLATION:
BEFORE CONNECTING TO THE POWER SOURCE FOLLOW THIS EASY ASSEMBLY AND PREPARATION STEPS. (NEVER
EXECUTE THESE PROCEDURES WITH THE CORD PLUGGED TO THE POWER SOURCE).
1.- ASSEMBLE THE CARRIAGE (FIG. 2) ON THE SLICER, FOLLOWING THESE STEPS:
A.- PLACE CARRIAGE (4) ON CARRIAGE SUPPORT (3).
B.- TIGHTEN CARRIAGE KNOB (1) FIRMLY, DON'T FORGET THE PLASTIC RING BETWEEN THE CARRIAGE AND KNOB.
2.- SET THE SLICER ON A CLEAN AND LEVEL PLACE.
3.- ROTATE THE THICKNESS CONTROL KNOB (6) TO BE SURE THAT IT WORKS FREELY ALL THE WAY THROUGH, AND
CHECK THAT THE THICKNESS TABLE OPENS AND CLOSES SIMULTANEOUSLY.
NOTE:
CHECK THE POWER REQUIREMENTS OF THE NAME PLATE WITH YOUR LOCAL REQUIREMENTS (THE
VOLTAGE OF THE MOTOR CAN BE CHANGED TO
110 VOLTS, BY A QUALIFIED ELECTRICIAN, TO DO THIS PLEASE CONTACT YOUR PRO-CUT DEALER).
4.- CONNECT THE SLICER TO THE POWER SOURCE. THE POWER SOURCE SHOULD BE CLOSE ENOUGH TO THE
MACHINE TO PROVIDE EASE OF DISCONNECTION FOR CLEANING AND SERVICING.
DELI MEAT SLICER
KMS-12
WARNING!:
NEVER OPERATE THE MACHINE WITHOUT PROPER TRAINING
SERIOUS INJURY MAY HAPPEN.
