background image

5

 Momentum mo8 Manual

Thank you for your recent purchase of the Pro Co Momentum mo8. We hope you fi nd our product 

to be versatile and fl exible. The entire line of Momentum products was designed with the intention of 

offering optimal fl exibility for multitude of applications.

Pro Co Sound,  a Michigan based business, was founded in 1974. We build audio interface products, 

in-ear monitor controllers and facility distribution systems. We continue to live by our mission;

 “To become our customers’ very best partner, by building a world class organization, through contin-

ual, rapid improvement in all that we do, and to share in the successes and failures of our efforts.”

Welcome to the Pro Co Family.

Upon receiving your Momentum System, please check all cartons for damage. If there is damage,  

notify the shipper and dealer in that order.  Before removing any components of your Momentum 

System from the shipping cartons, be sure that the order is complete as expected.  Do this by check-

ing each Momentum System component on your packing slip to be sure it matches the number of 

packing boxes and the specifi c type and number of components contained within.  Fill out the war-

ranty cards and send them in! You should fi nd the following in the carton:

1 x mo8 

 

 

 

2 x Stage Boots (optional)

2 x Rack Ears   

 

 

1 x One Spot Power Supply

Welcome

Thank You

Receiving Your Momentum mo8

NOTE: Stage boots may be requested, for no additional charge at time of order.

Summary of Contents for Momentum MO8




















Reviews: