18
Momentum mo8 Manual
Clear Settings
Sample Rate
Channel Start Route (Off or 1-249)
Toggle F2 until Chn is displayed.
1.
Tap F1 to activate Chn “edit” mode.
2.
Tap F1 to decrease value. Press F2 in increase value. Channels increase/decrease in
3.
groupings of eight. (Off mutes all channels)
Press and hold F1 and F2 to execute and save the change.
4.
Control Panel Functions
Chapter 3
Within this function, selecting Clr will allow the user to reset the IP to the factory default of
1.
192.168.1.1.
Toggle F2 until Adr is displayed.
2.
Tap F1 to activate Adr “edit” mode.
3.
Tap F1 to decrease value. Press F2 in increase value. (Toggle F2 to select Clr to set the IP
4.
to factory default of 192.168.1.1.)
Press and hold F1 and F2 to execute and save the change.
5.
Exit by allowing display to time out.
6.
Toggle F2 until Sr is displayed.
1.
Tap F1 to activate Sr “edit” mode.
2.
Tap F2 to change the value: 48 = 48K Sample Rate ; 96 = 96K Sample Rate
3.
Press and hold F1 and F2 to execute and save the change.
4.
Return to selecting channels or exit by allowing display to time out.
5.
This function sets attenuation to zero.
1.
Toggle F2 to select Clr.
2.
Tap F1 to activate Clr. (It will flash)
3.
Press and hold F1 and F2 simultaneously to execute and save the change.
4.
Exit by allowing display to time out.
5.
Description of Functions
IP Address Edit
