5
SET UP PROCEDURE
(1.) Connection to LCD or CRT
( In This section, after finishing the
installation you will have a TV function only)
a. Take the TV BOX main unit, let it upright or horizontally placed beside your CRT or
LCD
b. Connect the Antenna or CATV cable to the “CABLE IN” of the back panel of TV
BOX
b. Take the VGA Cable of CRT or LCD, connect the HD-15 VGA connector to “TO
MONITOR” on the back panel of TV BOX. Fasten the screws,
Please note: It is
very important to fasten the screws. Loose connection will cause the
distortion of Picture.
d. Take the connector of your Multimedia speaker (please note the connector should
be 3.5mm male stereo type), connect to “SPEAKER” on the back panel of TV BOX
e. Take out the AC/DC adaptor (included), please check the Voltage of your outlet of
AC Power is the same rating with the adaptor. Hook the AC/DC Adaptor to the Outlet,
connect the output of DC to “DC 5V” on the back panel of TV BOX
f. Turn on the Power of CRT or LCD, then push “POWER” button to “TV Mode”, if
there are TV screen on your CRT or LCD. Congratulation!
you have finished the Installation.
*All brand names and trademarks stated or illustrated are related to their respect owners.
b
c.
e.
d.
CRT or LCD
Speaker
Rear
AC/DC
Adaptor
