10
Hue:
change the color tone of the TV box
Color Temperature:
change the color temperature of the TV
Picture mode:
There are 4 selections, normal/user/bright/soft , to Change the picture mode.
2. Search : Auto scan
1.
Picture
2. Search
1.Auto Scan
Fast Scan
3. Audio
Normal Scan
5. Time
2.Manual Scan
Channel 1
6. Access.
Band VHFL/VHFH/UHF
Search
Å
Æ
Fine >>>
Skip ON/OFF
3.Audio Sys
BG/DK/I
4.CH Exchange1
1
5.CH Exchange2
1
6.Confirm Yes
OK
Description of sub item
Auto Scan :
There are 2 methods for scanning the TV Channel.
Fast Scan:
Scan the TV channel via Channel mapping.
Normal Scan:
Scan the TV channel via Frequency step by step. It will take longer time for
scanning all the channels
Manual Scan:
In order to get more channels, sometimes you need to scan the channel via MANUAL
scan method. There are 5 items that you will need to do the scan.
Channel:
You can use VOL+/- to choose the desired channel
Band:
VHFL/VHFH/UHF 3 bands for your choice
Search:
do the search
Fine:
fine tune the frequency, add or decrease 0.1MHz /step
Skip:
skip the channel
CH Exchange1, CH Exchange2:
When you scan the channel, you can set the channel 2 as CH
Exchange 1, Channel 7 is CH Exchange 2, then press confirm, than when you press CH2, the content
is CH7, press CH2, the content is channel 7.
Audio Sys:
Select audio system that match your TV system.
Confirm Yes:
When press this key, Channel swapping will activate.
3 .Audio : audio setup
1. Picture
2. Search
3.Audio
1.volume
4. Setup
2.equalize
5.Time
6.Access
Description of sub item
Volume:
change the level of audio output
Equalize:
change the balance of the audio output of the TV Box
