4. CYLINDER LINER MEASUREMENT
The Prisma DI-5C also has a preprogrammed function for storing
up to 45 cylinder liner measuring documents.
The accessory Prisma DI Ovality Kit, part no. 488-8100 is required
for cylinder liner measurement. This measuring equipment can
be used to accurately record ovality patterns of cylinders
ranging between 180 mm to 600 mm bore. Larger liners
may be measured with additional extension bars supplied
by PrismaTibro.
5. CALIBRATION OF INSTRUMENT
Calibration of instrument is neccessary after change of transducer, done at PrismaTibro,
Sweden – send an email to [email protected]
ITEM NO DESCRIPTION
412-2642 Adjusting sleeve, 10 mm
423-3637 Adjusting sleeve, small 10 mm
412-2643 Adjusting sleeve, Standard, 12 mm
365-6022 Battery Li-Ion with 3 wires connector
412-2893 Cable 7p/5p DIN, 3,6 meter
412-2897 Cable 7p/5p DIN, 7 meter
501-1992 Charger for Li-Ion battery
458-5000 Extension Bar Set: 2x160 mm, 1x80,
40, 20, 10 mm, 10 mm measuring tip
458-5107 Extension Bar, 10 mm
458-5160 Extension Bar, 160 mm
458-5205 Extension Bar, 20 mm
458-5402 Extension Bar, 40 mm
458-5809 Extension Bar, 80 mm
423-3640 Locking Ring, Small, 10 mm
412-2794 Locking Ring, Standard, 12 mm
412-2793 Locking Ring, 10 mm
ITEM NO DESCRIPTION
412-2899 Magnet to be attached to cable
458-6123 Measuring Tip, 14 mm
458-6074 Measuring Tip, small, 7 mm
458-6106 Measuring Tip, Standard, 10 mm
12-2903-A Prisma DI Plastic Case, Black 300x265x140 mm
458-6000 Spare Tips Set:
Transducer Tip Standard & 17 mm,
Measuring Tip Standard & 14 mm
423-3005 Transducer Small, min 60 mm,
Including measuring tip 7 mm
412-2005 Transducer Standard, min 89 mm
including measuring tip 10 mm
434-4758 Transducer Tip, 17 mm
412-2214 Transducer Tip, Standard
434-4005 Transducer W, min 100 mm,
Including measuring tip 10 mm
501-1900 USB Cable 2 meter
1. Remove adjusting
sleeve
1
and
locking ring
2
2. Unscrew the brass nut
3
3. Pull out the spring
4
4. Pull out the complete
tip unit
5. Remove the teflon
cover
5
if mounted
6. Unscrew the tip
6
from the core
7
and mount the new transducer tip
7. Remount in opposite order
2
3
5
6
7
1
4
6. SPARE PART LIST
CHANGE TRANSDUCER TIP
