Princeton Instruments ProEM+ EMCCD, User Manual

Page: 132 / 152

131
Appendix C
Mounting the ProEM+ to a Spectrograph
Introduction
ProEM+ cameras for imaging are designed with a C-mount adapter to accommodate
C-mount lenses. For these cameras, an optional C-mount to spectrometer-mount adapter
is available.
Other ProEM+ cameras have a flange-mount nose which can be mounted to either an
Acton sliding tube or to the camera mounting plate of an IsoPlane spectrograph. When
mounting your camera, follow the instructions in this appendix or the Quick Start
instructions shipped with your camera and/or spectrograph.
The table below cross-references these items with the page number for the appropriate
instruction set.
Spectrograph Adapter Kit
No.
Page
Acton (ProEM+:1600 with 3.60” Flange-Mount) 132
IsoPlane (ProEM+:1600 with 3.60” Flange-Mount)
133
Acton (ProEM+ with C-Mount) 134
Acton SP-2350/SP-2550 (ProEM+ with adjustable C-
to spectroscopy-mount)
7050-0104 135
Acton SP-2150/SP-2750 (ProEM+ with adjustable C-
to spectroscopy-mount)
7050-0107 136
Note:
When mounted to a spectrograph, the text on the back of the ProEM+ should be
right side up.