VVR - MANUAL
6 | VVR– Manual | AntecControls.com
Additional Components
The additional components for each available option are outlined in this section.
Controls Enclosure
The venturi valve retrofit has an option to order a controls enclosure. The controls enclosure
comes with two different components.
Component
Quantity
Description
Enclosure Bracket
1
Enclosure bracket mounted to the base plate of the
venturi valve.
Enclosure Lid
1
Used to cover the enclosure.
Potentiometer
The venturi valve retrofit has an option to order a potentiometer. The potentiometer comes
in two different options.
Component
Quantity
Description
Potentiometer
(Option #1)
1
Potentiometer with cable, potentiometer plate, and
shaft coupler. This potentiometer assembly is the
most commonly used option and is used with base
plates that have slotted design
NOTE:
See the
Potentiometer Installation
section
for more detail.
Potentiometer
(Option #2)
1
Potentiometer with cable, potentiometer plate,
mounting bracket, shaft couplers and extension pin.
This potentiometer assembly is required when the
existing base plate does not have tab slots.
NOTE:
When ordering potentiometers a specials quote will need to be entered in Antec
Select. Please contact the Antec Applications team for assistance with the specials quote.
Option #1
Option #2
Lid
Enclosure Bracket
CAUTION
When units are shipped mounted in an
enclosure, the label will be shown on the
enclosure. This will indicate where the
controller is to be installed.