Printed in USA 10/10 © 2010
6
541-531revD-EN
Product Holding Bin
DHB-BK41/43
Selecting Breakfast and Regular Menus
There are six menus available:
BKFT LED ON = Menu1 or Menu6
REG LED ON = Regular2, Regular3, Regular4, or Regular5
Press and hold the MENU/ENTER button, then use the UP or
DOWN Arrow button to scroll through the 6 menus.
1
When scrolling, menu numbers
appear in this display.
When the desired menu is displayed, release the MENU/
ENTER button. The food products for the menu will be
displayed in the upper and lower PAN displays.
2
When timers for a different menu are still active, those BKFT
or REG LEDs will flash until they are all cancelled.
Programming the Menus
Press and hold the PRINCE CASTLE LOGO button (on the
button bar) until all the displays show
PROG
and the PAN
buttons LEDs all glow RED.
1
A. Press the PAN button next to the display to be changed. The
LED will change from RED to YELLOW and the display will
change from
PROG
to the assigned product choice.
3
B. Press the UP or DOWN Arrow button to scroll to the desired product
choice.
C. Press the MENU/ENTER button to save the selection. All displays
will show
PROG
.
Press and hold the MENU/ENTER button. The display next to
the MENU/ENTER button will show the menu choices. Use the
UP or DOWN Arrow button to scroll through the 6 menus.
Release the MENU/ENTER button when the desired menu is
displayed.
2
When the MENU/ENTER button is released, all displays will
again show
PROG
.
A. Repeat Steps 2 and 3 as required.
B. Press the PRINCE CASTLE LOGO button to exit the
Program Mode and return to the Run Mode.
NOTE: Up to six items (one for each menu) may be
programmed for each PAN button. A pan may be set as “not
used” by assigning “----” as its product.
4
