Dual Mount Installation
A Dual Mount Digital Clock consists of two single-sided digital clocks and a kit. The kit contains a flange (piece that mounts to
ceiling or wall), a bracket (piece that bolts to flange and to which two clocks are mounted), and the hardware necessary to
complete the installation. Using the kit, you combine the two single-sided digital clocks to create a dual clock.
NOTE
The two clocks function independently of each other, requiring each clock’s settings to be configured separately.
Materials supplied
l
Two single-sided digital clocks
l
Flange: mounts to ceiling or wall
l
Bracket: bolts to flange and to which two clocks are mounted
l
Hardware necessary to complete the installation
Materials required (not supplied)
l
One junction box
How to install a Dual Mount Digital Clock/Timer
1. On the wall or ceiling, measure and drill holes with the correct spacing to mount the flange over the junction box.
2. Attach the flange to the wall or ceiling using the toggle anchors and the longer machine screws provided.
NOTE
If wall mounting to location outside of the junction box, break off or cut openings in flange to route power cords.
3. Attach the bracket to the flange using the shorter machine screws, nuts, and washers provided.
NOTE
Classic Series only: For 4 x 4" wall mounting ensure the bracket tabs are on the bottom.
4. For wall mount only, knock out power cord break.
5. Wire clocks to main power, using cord retaining clips to dress wires.
6. Align the clock to the bracket hooks and hinges and snap into place.
23
