DRAFT
Step 6: Ground antenna mast
The National Electrical Code (NEC) requires that every antenna installation be grounded. Also many areas have local antenna
grounding codes. Be sure that you are familiar with local grounding and other antenna regulations and codes.
1. Secure the ground clamp (supplied) around the antenna mast.
2. Insert and tighten the #6 gauge wire (supplied) in the ground clamp.
NOTE
Cut the wire off at the necessary length. The remainder of the wire will be used to ground the Transceiver.
3. Connect the other end of the #6 gauge wire to a verified building/earth ground.
Step 7: Install GPS Receiver
A GPS Receiver is required when a Transceiver is set to use GPS as its time source.
21
