- 16 -
f.
Now, you can name the partition you are about to load into
the Hard Drive. To enter the name, you need to use the UP
or DOWN buttons to select the character and use “>>” or
“<<” button to move the cursor position and once you’ve
finished, move the cursor to “OK” and press “>>”. For
example, if you want to name the partition for your master
disc as “FUN”. Then do the following:
Make sure the cursor is located at the first position:
i.
Press “DOWN” button consecutively until “F”
is displayed.
ii.
Press “>>” button once to move the cursor to
the next position.
iii.
Press “DOWN” button consecutively until “U”
is displayed.
iv.
Press “>>” button once to move the cursor to
the next position.
v.
Press “DOWN” button consecutively until “N”
is displayed.
vi.
Press “>>” button once to move the cursor to
the next position.
vii.
Now, we have the name “FUN” displayed and
then, press “>>” consecutively until the cursor
is moved to “OK”.
viii.
Then, press “>>” once to submit your name
selection.
Edit Partition Name
[x ] OK?
