- 7 -
b.
Then. you will see the Counter Selection Menu like the
following:
c.
The Counter Selection Menu will let you choose how many
copies you want to make for your project. This Counter
Selection feature will allow the duplicator to count the
number of copies you’ve made and prompt you when the
desired number of copies has been made.
You can select “No Counter” if you prefer to copy continuously
with no interruption. (It will still count the number of copies, but it
will not notify you when to stop.) To select the “No Counter”,
simply press “>>” button when you see the screen above. Then
skip below and continue on to step “d”.
Or, you can select “Specify Counter” between 1 to 9999 by
pressing the UP or DOWN navigation button to the below screen:
Then please press “>>” button to submit. You shall see the screen
below:
To specify the number of copies for your project, you need to
enter/input a 4-digit number. If you are planning to specify a
number that is less than 4 digits, please fill the leading spaces with
“0”s (any leading “0” will be skipped). An example of that 4-digit
number could be “0234” (Two hundred and thirty four), or “0010”
(ten). Remember, the beginning “0”s are skipped, therefore “0010”
means “10”, which is the number 10.
Counter:
Specify Counter
Specify Counter:
[0 ] OK?
Counter:
No Counter
