18
The NVR comes with a pre-configured static IP “
192.168.101.50
”. However,
it is only used when there is no DHCP server presented in the network. The
NVR will turn on its DHCP server function and act as the DHCP server in the
network. To connect to the NVR, use a PC that is on the same network over a
switch or hub, or connect the PC directly to the NVR using a crossover CAT5
Ethernet cable.
The PC that is connected directly to the NVR (or within the same local area
network) should receive an IP from it. Simply access the NVR from your web
browser with its IP address
Again, you should be prompted for the username and password. Enter its de-
fault username “
admin
” and password “
admin
” and then click”OK” to enter
the system
Access NVR with its default IP address
