15
Connect to the NVR
There are various ways you can connect to the NVR and below are the sug-
gested methods for different network setup:
•
The NVR is placed in a network with a DHCP server: Connect to the NVR
by using
“PRIME Device Search” Utility
•
The NVR is placed in a network without DHCP server (or you are connect-
ing to it directly):
Access NVR with its default IP
Use PRIME Device Search Utility
If the NVR is placed in a corporate network or a local area network where a
DHCP server is already presented, install the “PRIME Device Search” utility on
the CD from a computer that is on the same network and locate the NVR with
its IP address that is assigned by the top-level DHCP server.
To begin, launch the “PRIME Deivce Search” utility from the CD and proceed
with the installation:
