PRIME DESIGN, A SAFE FLEET BRAND
▪
Address: 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118
▪
Phone: 651-552-8554
▪
Toll Free: 1.8.PRIME.RACK
▪
Fax: 651-552-1799
▪
Email: [email protected]
▪
Website: www.primedesign.net
TM & © 2018 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6764268, 6971563, 2364879, 8857689, 8511525, 8991889, 2271515, 2364897, 9506292, 9481313, 9481314, 9796340, 6202807, 6427889, 9415726 AND OTHER PATENTS PENDING
6
Z Plate Cam
Z Plate Cam Nut
Z Plate Cam held
in position with
19mm wrench
VRR3-GM31G-ST B
ASE
ASSEMBL
Y INSTR
UCTIONS–CROSSB
AR MOUNTINGS
1.9
Using the wrench, rotate the Z
Plate Cam to raise and engage
the Z Plate into the vehicle’s
roof gutter.
Keep the Cam Lobe at its
highest vertical position and
inline with the Mounting
Bracket for Steps 1.10 & 1.11
1.8
Place a 19mm or 3/4”
open end wrench onto
the Z Plate Cam.
1.10
Place a 13mm box
end wrench onto the
Z Plate Cam Nut.
1.11
Ensure the vehicle’s roof gutter is
engaged within the Z Plate, and
the Mounting Plate is fully seated
inside the gutter.
Torque the Z Plate Cam Nut to 90
in-lbs. Repeat this procedure for
the all remaining Brackets.
Summary of Contents for VRR3-GM31G-ST
Page 1: ......
