PRIME DESIGN, A SAFE FLEET BRAND
▪
Address: 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118
▪
Phone: 651-552-8554
▪
Toll Free: 1.8.PRIME.RACK
▪
Fax: 651-552-1799
▪
Email: [email protected]
▪
Website: www.primedesign.net
TM & © 2018 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6764268, 6971563, 2364879, 8857689, 8511525, 8991889, 2271515, 2364897, 9506292, 9481313, 9481314, 9796340, 6202807, 6427889, 9415726 AND OTHER PATENTS PENDING
4
1
M8 x 65MM
Flat Washer
M8 Locknut
2
VRR3-GM31G-ST B
ASE
ASSEMBL
Y INSTR
UCTIONS–CROSSB
AR MOUNTINGS
FBM ASSEMBLY SEQUENCE
Due to the compound curves on the GM
van roof, the Mounting Brackets must be
assembled in the exact sequence shown.
Do not tighten or torque any fasteners
until specified.
MOUNTING BRACKETS
Apply Anti-Seize to all M8 x 65MM Flat Head Screws, then
install the Mounting Brackets using the hardware shown.
1.1
1.2
Leave all indicated screws on all the Mounting Brackets loose
at this time. Do not tighten screws until Step 1.7
Leave all these
Mounting Bracket
bolts loose
Summary of Contents for VRR3-GM31G-ST
Page 1: ......
