To properly power all peripherals through EAGLE CORE:
1)
BEFORE
connect the EAGLE-compatible (optional) power cables to the
EAGLE CORE power OUT ports and then to the power port of your device
2)
AFTER
connect the power supply or stabilized battery to the EAGLE CORE
power in port
All instruments will be powered. Once powered, EAGLE CORE will turn on and you
can turn on remote control and use the telescope. When you want to turn off the
telescope, if you want to disconnect the cables follow this procedure:
1)
BEFORE
switch off EAGLE CORE remotely via a dedicated app, EAGLE CORE
will emit a sound. The wait for the ACT LET to be off before removing
power.
2)
AFTER
disconnecting the power cable from the power IN port of EAGLE
CORE
3)
THEN
disconnect the power cables from the 3 power OUT ports of EAGLE
CORE
If for some reason you can no longer access EAGLE CORE via Wi-Fi, you can reset the
Wi-Fi network by holding down the Wi-Fi button on the EAGLE CORE for about 10”.
EAGLE CORE emits 3 sound signals in sequence and starts the Wi-Fi network again
without interrupting the autoguide or acquisition operations. If this function does not
work, it is possible to press the reset button RST, in this case EAGLE CORE is forced to
restart, while all the devices powered by EAGLE CORE remain powered.
85