P r i m a L u c e L a b i S r l
S p i d e r 2 3 0 u s e r m a n u a l
Take the second counterweight for Declination axis (
4
) and insert it into the support device for equatorial mounts,
as shown in the figure below. Place it towards the end of the plate, as for the other counterweight. So fix it by using
the two fixing screws and make sure it does not move.
!
Than take the safety catch and fix it at the end of the support device for equatorial mounts using two M6x12
screws.
!
!
!
!
!
!
!
p a g e
!
2 2
Fixing screws of
Declination
counterweights
Safety catch