7
Versa Seat with Manual Recline
I I I . I N S T A L L A T I O N
INSTALLING VERSA SEAT WITH MANUAL RECLINE
Installing the Versa Seat with Manual Recline onto the Power Chair base is best accomplished with two people.
1. Position the Versa Seat with Manual Recline over the Power Chair base. This is best accomplished by having
a person on either side of the Power Chair base, holding the Versa Seat with Manual Recline by its tie-down
mounts. See figure 2.
2. Insert each of the four seat towers into their respective seat tower receivers, beginning with the rear seat
towers. See figure 3. Then, position the two front seat towers into their seat tower receivers. See figure 4.
3. Install the four seat tower (ball detent) pins. See figure 5.
4. Make your adjustments to the seat. (See IV. Adjustment.)
FIGURE 2. Position Seat over
Base
FIGURE 3. Insert Rear Seat
Towers into Receivers
FIGURE 4. Insert Front Seat
Towers into Receivers
FIGURE 5. Install Seat Tower (Ball
Detent) Pins
SEAT TOWERS
SEAT TOWER
RECEIVERS
SEAT
TOWERS
SEAT TOWER
(BALL DETENT)
PIN
TIE-DOWN
MOUNTS
