Pride Versa Seat Owner'S Manual Download

Page: 5 / 22

Versa Seat with Manual Recline

I . I N T R O D U C T I O N

Pride Owners Club

As a Pride product owner, you are invited to register your products warranty and enroll in the Pride Owners Club.

You may do so by filling out and returning your enclosed registration card or by visiting Prides web site at

www.pridemobility.com

. As a registered member, each time you visit our site, you will have access to the most

interactive and honest educational venue available today for people with mobility needs, their families, and friends.

From our home page, click on the button that reads Owners Club to enter a page dedicated to current and

potential Pride product owners. You will gain access to interviews, stories, recreation ideas, daily living tips,

product and funding information, and interactive message boards. Message boards invite you to speak with other

Pride customers as well as Pride representatives who are available to assist you with any questions or concerns

you may have. You will receive a free gift simply for registering with the Pride Owners Club.

My Authorized Pride Provider is:

Name:_______________________________________________________________________________

Address:_____________________________________________________________________________

Phone Number:________________________________________________________________________

Quick Reference Information about your Versa Seat with Manual Recline:

Serial Number:__________________________________________________________________________

Purchase Date:________________________________________________________________________

NOTE:If you ever lose or misplace your warranty card or this owners manual, call or write to us and we

will be glad to send you a new one immediately.

Summary of Contents for Versa Seat























Search results

Summary of Contents for Versa Seat

Reviews:

Related manuals for Versa Seat

Brands by name

Popular brands

Pride Versa Seat, Owner'S Manual

Search results

Summary of Contents for Versa Seat

Reviews:

Related manuals for Versa Seat

Brands by name

Popular brands