Pride Jazzy 1105 Owner'S Manual Download Page 2

Page: 2 / 47

www.pridemobility.com

Jazzy 1105/RevH/Feb03

S A F E T Y G U I D E L I N E S

Please read and follow all instructions in this owners manual before attempting to operate your power

chair for the first time. If there is anything in this manual you do not understand, or if you require additional

assistance for set-up, contact your authorized Pride provider.

Using your Pride product safely depends upon your diligence in following the warnings, cautions, and

instructions in this owners manual. Using your Pride product safely also depends upon your own good

judgement and/or common sense, as well as that of your provider, caregiver, and/or healthcare professional.

Pride is not responsible for injuries and/or damage resulting from any persons failure to follow the warnings,

cautions, and instructions in this owners manual. Pride is not responsible for injuries and/or damage resulting

from any persons failure to exercise good judgement and/or common sense.

The symbols below are used throughout this owners manual to identify warnings and cautions. It is very

important for you to read and understand them completely.

WARNING! Failure to heed the warnings in this owners manual may result in personal injury.

CAUTION! Failure to heed the cautions in this owners manual may result in damage to your power

chair.

Pride Mobility Products Corp.

INFMANU1131

Summary of Contents for Jazzy 1105
















































Search results

Summary of Contents for Jazzy 1105

Reviews:

Related manuals for Jazzy 1105

Brands by name

Popular brands

Pride Jazzy 1105, Owner'S Manual

Search results

Summary of Contents for Jazzy 1105

Reviews:

Related manuals for Jazzy 1105

Brands by name

Popular brands