Pride Jazzy 1105 Owner'S Manual Download Page 5

Page: 5 / 47

Jazzy 1105/RevH/Feb03

www.pridemobility.com

I . I N T R O D U C T I O N

Pride Owners Club

As an owner of a Pride product, you are invited to register your products warranty and enroll in the Pride

Owners Club. You may do so by filling out and returning your enclosed registration card or by visiting

Prides web site at www.pridemobility.com. As a registered member, each time you visit our site, you will

have access to the most interactive and honest educational venue available today for people with mobility

needs, their families, and friends.

From our home page, select Owners Club to enter a page dedicated to current and potential Pride product

owners. You will gain access to interviews, stories, recreation ideas, daily living tips, product and funding

information, and interactive message boards. These message boards invited you to communicate with other

Pride customers as well as Pride representatives who are available to assist you with any questions or

concerns you may have.

My Authorized Pride Provider Is:

Name:_______________________________________________________________________________

Address:_____________________________________________________________________________

Phone Number:________________________________________________________________________

Purchase Date:________________________________________________________________________

NOTE:If you ever lose or misplace your product registration card or your copy of this manual, contact

us and we will be glad to send you a new one immediately.

Summary of Contents for Jazzy 1105
















































Search results

Summary of Contents for Jazzy 1105

Reviews:

Related manuals for Jazzy 1105

Brands by name

Popular brands

Pride Jazzy 1105, Owner'S Manual

Search results

Summary of Contents for Jazzy 1105

Reviews:

Related manuals for Jazzy 1105

Brands by name

Popular brands