Pride Jazzy 1105 Owner'S Manual Download Page 28

Page: 28 / 47

www.pridemobility.com

Jazzy 1105/RevH/Feb03

PILOT CONTROLLER

The Pilot controller is an integral controller. This means that

the joystick is housed in the same enclosure as the controller

module. See figure 23. This assembly is mounted on the seat

arm. The Pilot controller is connected to the motors, the bat-

teries, and the battery charger through a cable that connects to

the utility tray.

Joystick Functions

The joystick functions are similar for all controller configura-

tions. The joystick controls the direction and speed of the power

chair. See figure 24. When you move the joystick from the

neutral (center) position, the electromagnetic brakes release

and allow the power chair to move. The further you push the

joystick from its neutral position, the faster your Jazzy moves.

When you release the joystick and allow it to return to the

neutral position, you engage the electromagnetic brakes. This

causes the chair to decelerate and come to a complete stop.

Speed and Response Adjustment

The Pilot joystick controller is equipped with a speed and re-

sponse adjustment knob that allows you to select the speed

and response settings best suited to your requirements and environ-

ment. See figure 23. When you increase the speed (clockwise) or decrease the speed (counterclockwise),

appropriate changes are automatically made to the sensitivity.

Note: We recommend that the first few times you operate your Jazzy 1105 you turn the speed and response

adjustment knob to the slowest setting until you to become familiar with your new power chair.

Battery Condition Meter

The battery condition meter is located immediately in front of the joystick. See figure 23. This enables you

to monitor battery life. The battery condition meter indicates the approximate amount of battery life left.

Red, yellow, and green bars indicate that the batteries are fully charged.

Red and yellow bars indicate that you should charge the batteries if possible.

V I I I . O P E R A T I O N

Figure 24. Joystick Movement

BATTERY

CONDITION

METER

ON/OFF

KEY

SPEED AND

RESPONSE

ADJUSTMENT

KNOB

Figure 23. Pilot Joystick Features

WARNING! If your power chair begins to move

in an unexpected manner, immediately re-

lease the joystick. Unless the joystick is

damaged, this action should stop your power
WARNING! Unless faced with an emergency

situation, do not use the on/off key to stop

the chair. This will cause the power chair to

stop abruptly.

WARNING! Always turn the power off when

you are stationary to prevent unexpected

movement.

Summary of Contents for Jazzy 1105
















































Search results

Summary of Contents for Jazzy 1105

Reviews:

Related manuals for Jazzy 1105

Brands by name

Popular brands

Pride Jazzy 1105, Owner'S Manual

Search results

Summary of Contents for Jazzy 1105

Reviews:

Related manuals for Jazzy 1105

Brands by name

Popular brands