background image

Thank you for buying a Peace Sports MP-08 scooter! Enjoy it!

This manual contains all the information needed to ride, maintain, and generally get the most from 
your new scooter.  PLEASE READ ALL OF THIS MANUAL BEFORE YOU RIDE YOUR 
SCOOTER.  This is very important, because it will familiarize you with your scooter, and its proper 
care and handling.  Proper maintenance and service will maximize both the safety, and life of the bike. 
Should you need tech support or after sale service, please contact your dealer.  

The Information contained in this manual is the most up to date at the time publishing, however we 
reserve the absolute right to amend this document.  These changes can/will be made with/without 
notice.  Please note the Name on the name plate, the VIN and the engine code, as this information can 
be helpful in the future.

IMPORTANT NOTICE:

This scooter is designed to carry only one passenger, please do exceed the recommended weight limit.

This motor cycle is designed for use on level roads only, and is not intended for off road use.

The maximum load for this bike is : 330lbs

READ THIS OWNERS MANUAL CAREFULLY
pay special attention to the following warnings:

WARNING: this statement indicates that there is a strong possibility for SEVERE INJURY or 
DEATH if the instructions are not followed.

CAUTION: this statement indicates that there is a possibility of personal injury or equipment 
damage if the instructions are not followed.

NOTE: gives helpful information.

This manual should be considered a permanent feature of the scooter, and should always be 
transferred to the new owner, just like the keys or the title.

This document is copyright 2010, Peace Powersports, Inc. This manual and pictures contained within 

are property of Peace Powersports, Inc. and to be used by Peace Powersports and it's affiliates only. 

Any unauthorized distribution or plagiarism is a violation of federal law.

Contents:
Section 1 – Safe riding

1-3 Safe Riding Rules
1-3 Protective Clothes
1-3 Retrofitting
1-3 Loading and accessories

Section 2 – Description

2-5 Parts Location
2-6 VIN Record
2-7 Instruments and Indicators
2-7 Ignition Switch
2-8 Steering Lock
2-8 Seat Cushion Lock and Luggage Box
2-9 Left and Right Handlebar controls
2-10 Fuel and Fuel Tank
2-10 Petcock
2-10 Engine Oil
2-11 Tires

Section 3 – Operation Guide

3-12 Pre-ride Inspection
3-12 Starting the Scooter
3-12 Initial Break In
3-13 Riding
3-13 Parking

Section 4 – Maintenance 

4-13 Maintenance Schedule
4-15 Engine Oil Check and Change
4-16 Gear Oil change
4-17 Spark Plug
4-17 Valve Check and Adjustment
4-19 Air Cleaner
4-20 Idle Speed adjustment
4-20 Hydraulic Disc Front Brake Check
4-21 Rear Brake Adjustment
4-21 Muffler
4-22 Battery Maintenance
4-22 Fuse
4-22 Troubleshooting
4-22 Cleaning
4-22 Storage
4-23 Storage Removal
4-23 SPECS

Section 5 – Initial Setup

5-24 Post delivery inspection
5-24 Warranty information

2

Summary of Contents for MP-08













Reviews: