31
Jet 1
I X . C A R E A N D M A I N T E N A N C E
To check the brakes:
1. Turn on the controller and turn down the speed and response adjustment knob.
2. After one second, check the battery gauge. Make sure that it remains on.
3. Slowly push the joystick forward until you hear the electric brakes click. Immediately release the joystick. You
must be able to hear each electrical brake operating within a few seconds of joystick movement. Repeat this
test three times, pushing the joystick backwards, then left, and then right.
MONTHLY CHECKS
n
Check that the anti-tip wheels are not rubbing the ground when you are operating the Jet 1. Adjust them as
necessary. See V. Comfort Adjustments.
n
Check for extreme wear on the anti-tip wheels. Replace them as necessary.
n
Check for drive tyre wear. See your authorized Pride provider for repair.
n
Check the rear caster wheels for wear. Replace them as necessary.
n
Check the rear forks for damage or fluttering which indicates that they may need to be adjusted or have the
bearings replaced. See your authorized Pride provider for repair.
n
Keep your Jet 1 clean and free of foreign material, such as mud, dirt, hair, food, drink, etc.
YEARLY CHECKS
Take your Jet 1 to your authorized service provider for yearly maintenance. This helps ensure that your Jet 1 is
functioning properly and helps prevent future complications.
STORAGE
Your power chair should be stored in a dry place, free from temperature extremes. When storing, disconnect the
batteries from the Jet 1. See VIII. Batteries and Charging. If you fail to store the unit under the above conditions,
the frame can rust, and the electronics can be damaged.
CLEANING INSTRUCTIONS
n
Never hose off your Jet 1 or place it in direct contact with water.
n
Your Jet 1 has a clear-coated, ABS plastic body shroud that allows it to be easily wiped clean with a damp
cloth. Never use any chemicals to clean a vinyl seat, as they may cause the seat to become slippery or dry out
and crack. Use soapy water and dry the seat thoroughly.
