21
Jet 1
V I I . O P E R A T I O N
You control the speed and direction of your Jet 1 with the joystick controller.
WARNING! Do not use the on/off key to stop the chair. This may cause injury.
To operate your Jet 1:
1. Turn it on (push the on/off button). The battery condition meter will light, indicating the present charge of your
battery.
2. Push the joystick in the direction you wish to move. The further you push the joystick from the neutral (center)
position, the faster your Jet 1 moves.
WARNING! Always turn the power off when you are stationary to prevent unexpected movement.
The Jet 1 features a Dynamic DL joystick controller. See figure 24. The controller translates the speed and the
directional information from the joystick to the motors. It has self-diagnostic features that are designed to search
for potential problems at the rate of 100 times per second. If the controller detects a problem in the power chairs
electrical system, the power chair may, depending on the severity of the problem, stop functioning (see Trouble
Codes).
The controller is designed to maximize user safety under normal operating conditions. This controller, however,
cannot take into account circumstances that put your Jet 1 outside of its normal operating environment. It is very
important that you follow the precautions described within this manual.
Figure 24. Dynamic DL Joystick Controller
SPEED AND RESPONSE
ADJUSTMENT KNOB
ON/OFF BUTTON
BATTERY CONDITION
METER
