16
www.pridemobility.com
Jazzy EVO 614 Series
V. C O M F O R T A D J U S T M E N T S
Foot Platform Angle Adjustment
You can adjust the angle of the foot platform with a
hex key.
See figure 10.
To adjust the foot platform angle:
1. Flip up the foot platform and locate the adjustment
screw.
2. Turn the adjustment screw to raise or lower the
front of the foot platform.
Positioning Belt
Your power chair may be equipped with a positioning
belt that can be adjusted for operator comfort.
See
figure 11.
The positioning belt is designed to support
the operator so that he/she does not slide down
or forward in the seat. The positioning belt is not
designed for use as a restraining device.
Figure 11. Positioning Belt Adjustment
WARNING! The positioning belt is not designed for use as a seat belt in a motor vehicle. Anyone
traveling in a vehicle must be properly belted into seats approved by the vehicle manufacturer.
Your power chair is not suitable for use as a seat in any vehicle.
WARNING! The positioning belt should be secured at all times. Never allow the positioning belt
to hang or drag on the floor as it may become entangled.
To install the positioning belt:
1. Remove the rearmost screw that holds the seat hinge to the seat base on both the left and right seat hinges.
2. Insert the screw through the supplied washer, through the positioning belt and into the seat base for each side
of the power chair seat.
3. Tighten both screws.
To adjust the positioning belt for operator comfort:
1. Once seated, insert the metal tab on one side of the belt into the plastic housing on the opposite side until you
hear a click.
See figure 11.
2. Pull the excess strap attached to the metal tab until it is secure, but not so tight as to cause discomfort.
To release the positioning belt:
1. Press the push button mechanism on the plastic housing.
MANDATORY! Make sure the positioning belt is properly secured to the power chair and is
adjusted for operator comfort before each use.
MANDATORY! Inspect the positioning belt for loose parts or damage, including tears, worn spots,
bent hardware, damaged latch mechanisms, dirt or debris, before each use of the power chair.
If you discover a problem, contact your authorized Pride Provider for maintenance and repair.
