Pride Mobility Jazzy 1170 XL Owner'S Manual Download Page 4

Page: 4 / 51

www.pridemobility.com

Jazzy 1170XL

I . I N T R O D U C T I O N

SAFETY

WELCOME to Pride Mobility Products Corporation (Pride). The power chair you have purchased com-

bines state-of-the-art components with

safety

, comfort, and styling in mind. We are confident that these

design features will provide you with the conveniences you expect during your daily activities. Once you

understand how to

safely

operate and care for your power chair, it should give you years of trouble free

operation and service.

Read

and

follow

all instructions, warnings, and notes in this manual before attempting to operate your

power chair for the first time. In addition, your

safety

depends upon you, as well as your provider, care-

taker, or healthcare professional in using good judgement.

If there is any information in this manual which you do not understand, or if you require additional assis-

tance for setup or operation, please contact your authorized Pride Provider.

Failure to follow the instruc-

tions in this manual and those located on your power chair can lead to personal injury and/or dam-

age to the power chair, including voiding the warranty.

PURCHASERS AGREEMENT

By accepting delivery of this product, you promise that you will not change, alter, or modify this product or

remove or render inoperable or unsafe any guards, shields, or other safety features of this product; fail,

refuse, or neglect to install any retrofit kits from time to time provided by Pride to enhance or preserve the

safe use of this product.

INFORMATION EXCHANGE

We want to hear your questions, comments, and suggestions about this manual. We would also like to hear

about the safety and reliability of your new power chair, and about the service you received from your

authorized Pride Provider.

Please notify us of any change of address, so we can keep you apprised of important information about

safety, new products, and new options that can increase your ability to use and enjoy your power chair.

Please feel free to contact us at the address below:

Pride Mobility Products Corporation

Attn: Customer Care Department

182 Susquehanna Avenue

Exeter, PA 18643-2694

[email protected]

800-424-8205

Summary of Contents for Jazzy 1170 XL




















































Search results

Summary of Contents for Jazzy 1170 XL

Reviews:

Related manuals for Jazzy 1170 XL

Brands by name

Popular brands

Pride Mobility Jazzy 1170 XL, Owner'S Manual

Search results

Summary of Contents for Jazzy 1170 XL

Reviews:

Related manuals for Jazzy 1170 XL

Brands by name

Popular brands