Pride Mobility Jazzy 1170 XL Owner'S Manual Download

Page: 13 / 51

Jazzy 1170XL

www.pridemobility.com

Preventing Unintended Movement

WARNING! If you anticipate being seated in a stationary position for an extended period of time,

turn off the power. This will prevent unexpected motion from inadvertent joystick contact. This

will also eliminate the possibility of unintended chair movement from electromagnetic (EM)

sources. Failure to do so may result in personal injury.

Prescription Drugs/Physical Limitations

Users must exercise care and common sense when operating a power chair. This includes awareness of

safety issues when taking prescribed or over-the-counter drugs or when the user has specific physical

limitations.

WARNING! Consult your physician if you are taking prescribed or over-the-counter medication or if

you have certain physical limitations. Some medications and limitations may impair your ability to

operate your power chair in a safe manner.

Alcohol

The power chair user must exercise care and common sense when operating his/her power chair. This

includes awareness of safety issues while under the influence of alcohol.

WARNING! Do not operate your power chair while you are under the influence of alcohol, as this

may impair your ability to operate your power chair in a safe manner.

Removable Parts

WARNING! Do not attempt to lift or move a power chair by any of its removable parts. Personal

injury and/or damage to the power chair may result.

I I . S A F E T Y

Electromagnetic and Radio Frequency Interference (EMI/RFI)

Laboratory tests have shown that electromagnetic and radio frequency waves can have an adverse affect on

the performance of electrically-powered mobility vehicles. The interference can come from sources such

as cellular phones, mobile two-way radios (such as walkie-talkies), radio stations, TV stations, amateur

radio (HAM) transmitters, wireless computer links, microwave signals, and paging transmitters. In some

cases, these waves can cause unintended movement.

This product has been tested and has passed at an immunity level of 20 V/m.

WARINING! To prevent unintended movement, turn off the power to the electrically-powered

mobility vehicle before using a cell phone, two-way radio, lap-top, or any other type of

radio transmitter.

WARNING! The electrically-powered mobility vehicle itself can disturb the performance

of other electrical devices located nearby, such as alarm systems.

NOTE: For further information on EMI/RFI, go to www.pridemobility.com. If unintended motion or

brake release occurs, turn the power chair off as soon as it is safe to do so. Call Pride at 800-424-8205

to report the incident.

Summary of Contents for Jazzy 1170 XL




















































Search results

Summary of Contents for Jazzy 1170 XL

Reviews:

Related manuals for Jazzy 1170 XL

Brands by name

Popular brands

Pride Mobility Jazzy 1170 XL, Owner'S Manual

Search results

Summary of Contents for Jazzy 1170 XL

Reviews:

Related manuals for Jazzy 1170 XL

Brands by name

Popular brands