Pride Mobility Jazzy 1170 XL Page 5 Owner'S Manual Download

Page: 5 / 51

Jazzy 1170XL

www.pridemobility.com

I . I N T R O D U C T I O N

PRIDE OWNERS CLUB

As an owner of a Pride product, you are invited to register your product's warranty and enroll in the Pride

Owners Club. You may do so by filling out and returning your enclosed product registration card or by

visiting Prides web site at www.pridemobility.com. As a registered member, each time you visit our site,

you will have access to the most interactive and honest educational venue available today for people with

mobility needs, their families, and friends.

From our home page, select Owners Club to enter a page dedicated to current and potential Pride product

owners. You will gain access to interviews, stories, recreation ideas, daily living tips, product and funding

information, and interactive message boards. These message boards invite you to communicate with other

Pride customers as well as Pride representatives who are available to assist you with any questions or

concerns you may have.

My authorized Pride Provider:

Name:_______________________________________________________________________________

Address:_______________________________________________________________________________

Phone Number:_________________________________________________________________________

Purchase Date:__________________________________________________________________________

NOTE: If you ever lose or misplace your product registration card or your copy of this manual, contact

us and we will be glad to send you a new one immediately.

Summary of Contents for Jazzy 1170 XL




















































Search results

Summary of Contents for Jazzy 1170 XL

Reviews:

Related manuals for Jazzy 1170 XL

Brands by name

Popular brands

Pride Mobility Jazzy 1170 XL, Owner'S Manual

Search results

Summary of Contents for Jazzy 1170 XL

Reviews:

Related manuals for Jazzy 1170 XL

Brands by name

Popular brands