31
priceindustries.com
|
AW-I - Manual
AW-I
APPENDICES
3. Apply the supplied ¼” thick gasket
material to one side of the open
face, ensuring it is placed as
shown in Figure 2 and that it is well
adhered.
4. It is recommended to spray soapy-
water on the entire roof curb prior
to placing the subsequent sections.
This will help with pulling the
sections together.
5. Move the second section into
place on the roof curb as close
as possible but no more than 2”
from the already anchored section
(Figure 3). Once the second section
is on the curb, the center lug can
be removed.
FIGURE 2: GASKET APPLIED TO THE PERIMETER OF THE OPENING
FIGURE 3: SECOND SECTION PLACED WITHIN
2” OF THE ANCHORED SECTION
GASKET
GASKET
