OHM™ LIGHT USER MANUAL
5
USER INSTRUCTIONS
General Notes
1)
Please read through this manual carefully before operating the OHM Light. Keep this manual for future reference.
2)
There are numerous safety instructions and warnings that must be adhered to for your own safety.
3)
OHM is not intended for residential use. It is only intended for use in a professional studio.
4)
OHM must only be serviced by a qualified individual.
5)
OHM is rated as IP20 - for indoor use and in a dry environment.
6)
OHM is not certified for use in hazardous locations.
7)
OHM's operation temperature is within the range of 0 to +50°C (32 to 104°F).
8)
Use only approved spare parts and accessories. (Refer to
Fixture Set Up
1)
Read these safety instructions carefully to ensure OHM and accessories are used safely.
2)
Ensure the 28mm Spigot or 12mm Lifting Eye is correctly mounted onto the yoke before rigging.
3)
For an alternative method of hanging OHM, a Hanger Assembly is available as an accessory. Ensure this is
correctly attached to OHM before rigging.
4)
Always use a suitable length safety cable(s) when hanging OHM. (Safety cables are not provided.) The length
should be as short as possible to reduce travel distance if the primary hanging accessory fails.
5)
OHM weighs 32kg, excluding accessories. The combined weight should be considered when choosing a suitable
safety cable(s).
6)
The safety cable(s) must be securely attached to the designated slots on OHM (detailed on
7)
Ensure that the yoke locking handle is correctly tightened when manipulating OHM in the required orientation for
safety purposes. NOTE: if the locking handle is not tightened correctly, the fixture may swing.
8)
Ensure the connection cables and any other cables are attached to the designated slots located on the yoke
corners (detailed on
9)
It is the user's responsibility to provide and wire their own power cable using the Neutrik power cable connector
provided with OHM.
10) Ensure OHM is stored within the range of -20 to +60°C (-4 to 140°F).
Ventilation
1)
Do not cover air ventilation slots on OHM or the fixture may overheat.
2)
Do not use OHM outdoors or in a wet environment.
3)
Keep OHM a minimal distance of 0.1m away from flammable materials/objects.
