26
BEST BOY
®
HP SPOT LUMINAIRE USER MANUAL
Ethernet Comm
The starting address for Ethernet (Art-Net/sACN) systems can be set from the HOME screen.
To program a starting address:
Step
1. At Home screen, press address number panel.
Step
2. At numeric keypad, enter new starting address and press ENTER.
Figure 2-16: Setting Starting Address (Ethernet Control)
To select an Art-Net or sACN universe:
If using Ethernet control, a universe must be selected in addition to the DMX address. The universe can be selected
and displayed in either alphabetic or numeric mode (using the UNIV FORMAT screen). The alpha mode is useful to
differentiate universes from DMX addresses and is the standard on PRG console systems. The valid universes for Art-
Net are 0-255 (A-IV), and the valid universes for sACN are 1-63999 (B-CPQN).
To set the Universe and Universe Format, press the CONFIG panel at the Home screen:
Figure 2-17: Selecting a Universe (Ethernet Control)
Note:
Refer to
on page 30 for more information about the Menu Touchscreen.
Control Input Type (Ethernet)