T
ROUBLESHOOTING
AND
M
AINTENANCE
: R
OUTINE
M
AINTENANCE
0 2. 9 8 1 2. 0 0 01 A
47
4
Routine Maintenance
Replacing the Lamp
Parts:
71.2566.1200.0 1 EA LAMP, FASTFIT, PHILIPS MSR GOLD™
Tools:
Cotton gloves or finger cots
WARNING:
Remove power from luminaire before performing any maintenance procedures.
CAUTION:
Refer to
"Proper Lamp Servicing and Operation" on page 46
before handling the lamp.
To replace lamp:
Step 1. Remove power from lamp and allow lamp to cool for at least 5 minutes.
Step 2. Remove power from luminaire.
Step 3. At rear of luminaire, rotate backcap counter-clockwise to remove (it will still be connected
by a tether). Refer to
Figure 4-1
on next page.
Step 4. Remove existing lamp by rotating lamp base counter-clockwise and pulling straight out of
backcap.
Step 5. Install new lamp and rotate clockwise to secure in place.
Step 6. Replace backcap.
Step 7. Optimize lamp. Refer to
"Adjusting the Lamp" on page 49
.
Step 8. Reset Lamp Hours. Refer to
"Lamp Screen" on page 25
.
