Controlling
Controlling Mains Powered Devices
Mains Powered Devices
Electrical appliances can be controlled wirelessly using an
ENERGISE
mains appliance controller.
Plug the
ENERGISE
power cable into an electrical socket and the electrical appliance into socket number
one of
ENERGISE
. Briefl y press Pair Button 1 on
ENERGISE
and the Pair LED will begin to fl ash slowly.
Immediately press the Pair Button on
SMOOTH TALKER
. The Pair LED on
ENERGISE
will continue to fl ash
slowly until pairing is complete at which point the Pair LED will light steadily for 5 seconds.
Assign a message using the above procedure.
Optimising the Battery Life
Optimising the Battery Life
To conserve battery life
SMOOTH TALKER
automatically enters a power saving mode after 30 minutes
SMOOTH TALKER
SMOOTH TALKER
without use. The Simply Works wireless transmitter/receiver is shut down, which saves power but also
prevents reception of switch activation data from external wireless switches.
To wake up
SMOOTH TALKER
from power saving, simply press any button or the main switch.
SMOOTH TALKER
SMOOTH TALKER
If you are not going to use
SMOOTH TALKER
for more than a few minutes it is best to turn it off
SMOOTH TALKER
SMOOTH TALKER
completely using the volume control (3). This also prevents accidental presses of the main switch
from playing messages during transportation.
Low Battery Warning
Low Battery Warning
If a message is cut short during playback and the Record LED fl ashes rapidly, this is an indication
that the battery is exhausted and should be replaced. Turning the volume down will prevent messages
being cut short and extend battery life a little.
To conserve battery life, avoid extensive use of high volume levels.
Maintenance
Maintenance
SMOOTH TALKER
has no user serviceable parts. If repair is necessary the unit should be returned to
Pretorian Technologies or an authorised Distributor.
Warranty
Warranty
SMOOTH TALKER
is warranted against defects in manufacture or component failure for a period of 24
months. The unit is designed for use in domestic and educational applications. Use outside these areas
will invalidate the warranty. Unauthorised repair or modifi cation, mechanical abuse, immersion in any
liquid or connection to incompatible equipment will invalidate the warranty.
Inserting Prompt Cards
Inserting Prompt Cards
A picture card may be inserted into the open lid of
SMOOTH TALKER
to act as a visual prompt.
SMOOTH TALKER
SMOOTH TALKER
The card
should be 75mm wide, and 35mm or more in height.
Should the array of LEDs and buttons
distract users when the lid is open, the Card
may be made around 75mm high to obscure
the LEDs and buttons, as shown here.
