Playing Messages from an External Wired Switch
Playing Messages from an External Wired Switch
Attach any wired switch with a 3.5mm plug into the switch input socket (4).
Playing Messages from a
Playing Messages from a Wireless Switch 125
Wireless Switch 125
Place
SWITCH 125
close to
SMOOTH TALKER
.
Press
and hold
the Pair Button (9) on
SMOOTH TALKER
until the Pair LED (10) flashes slowly.
Immediately press the Pair Button on
SWITCH 125
. The Pair LED on
SMOOTH TALKER
continues to
flash slowly until pairing is complete at which point the Pair LED lights steadily for 5 seconds.
SEND
can be used in place of
SWITCH 125
.
Note that wired and wireless switches can co-exist and perform the same function.
Controlling Battery Operated Toys/Appliances
Controlling Battery Operated Toys/Appliances
To enhance messaging and provide positive reinforcement,
SMOOTH TALKER
can activate battery-
operated toys/appliances.
Plug any switch adapted toy or appliance into the toy/appliance input socket (5).
To assign a message to the toy/appliance press the Record Button (1) briefl y
during
message recording.
Every time this message is played the toy/appliance will activate for the duration of the message.
Alternatively, for wireless activation of the toy/appliance,
SMOOTH TALKER
must be paired with
a SimplyWorks toy controller. Connect the toy/appliance to any toy controller e.g.
CONTROL LITE
,
CONTROL
or
CONTROL PRO
.
Press the Pair Button on the toy controller and the Pair LED will begin to fl ash slowly. Now press the
Pair Button
briefl y
on
SMOOTH TALKER
. The Pair LED on the toy controller will continue to fl ash
slowly until pairing is complete at which point the Pair LED will light steadily for 5 seconds. Assign a
message following the above procedure.
Note that wired and wireless toys can co-exist and will be turned on an off simultaneously.
Controlling Software During Message Playback
Controlling Software During Message Playback
SMOOTH TALKER
may also be paired with
RECEIVE
to allow software to be controlled by messages
which are assigned to toy/appliance control.
Briefl y press the Pair Button on
RECEIVE
and the Pair LED will begin to fl ash slowly. Now press the
Pair Button
briefl y
on
SMOOTH TALKER
. The Pair LED on
RECEIVE
will continue to fl ash slowly until
pairing is complete at which point the Pair LED will light steadily for 5 seconds.
Whenever a message is played which has toy/appliance control assigned,
RECEIVE
sends the Space
character to the computer via the USB lead for the duration of the message. This allows software
which uses Space to be used alongside
SMOOTH TALKER
.
