Recording Messages
Recording Messages
Press and hold the Record button (1) until the Record LED (2) illuminates. Release the Record button.
Press and hold down the switch top (6). Begin recording the fi rst message after you hear a beep by
speaking clearly into the microphone (11). Release the switch top when you have fi nished recording
the message. Repeat the procedure for additional messages in the sequence. Note that it is best to
hold down the switch for at least half a second after you have fi nished speaking to ensure that the
message is not cut short.
During recording the Record LED fl ashes slowly. When only 10 seconds of recording time remains the
Record LED will fl ash rapidly. If all the recording time is consumed,
SMOOTH TALKER
automatically
drops out of recording mode and is ready for playback.
When you have fi nished recording all the messages press the Record button briefl y to exit recording mode.
SMOOTH TALKER
is now ready to use.
Playing
Playing Messages
Messages
After recording, message playback begins from the first message recorded. Press down the switch
top to play the next message in sequence. When the last message is reached, playback returns to
the first message.
Playback volume may be adjusted using the volume control (3).
Stopping a
Stopping a Message
Message
During playback a message may be ended early by briefly pressing the Record button. Playback
continues with the next message when the switch top is next pressed.
Repeat
Repeating a
ing a Message
Message
First, play the message. Then, at the end of the message, briefly press the Record button. The
message will then be repeated each time the switch is activated.
To return to message sequencing, briefly press the Record button again.
The message repeat function only operates in Sequence Mode.
Using Messaging Modes
Using Messaging Modes
SMOOTH TALKER
has four additional messaging modes. To view the current mode setting, press
the Mode button (7). The adjacent Mode LEDs (8) illuminate to show the current Mode setting,
without any changes being made. If you wish to change to a different mode, press the Mode
button repeatedly until the appropriate LED lights. The Mode LEDs are extinguished after a few
seconds to conserve battery life.
