39
PRESTIGIO VISCONTE 1450W
ENG
Intel Display Note
Note that the monitor is the default Primary display device in both Intel(R) Dual Display Clone
Mode and Extended Desktop Mode.
Display Modes
Single Display
Only one of your attached displays is used.
Intel(R) Dual Display Clone
This mode will drive multiple displays with the same content. Each device may be configured independently for different
resolutions, refresh rates, color quality etc. Use this feature to display the screen through a projector for a pre-sentation.
Extended Desktop
This mode allows a desktop to span multiple displays and acts as a large work-space. This creates a lot more screen area
for display. Use the Display Properties control panel to drag the monitors to match the physical arrangement you wish
to use, or you may also use the Extended Desktop Settings control panel tab in Graphics Properties to configure the
relative size and position.
To Enable Intel(R) Dual Display Clone Mode
1. Attach your external monitor to the external monitor port (or TV to the S-Video-Out Port), and turn it on.
2. Go to the Graphics Properties control panel and click Devices (tab).
3. Click Intel(R) Dual Display Clone (icon).
4. Choose which attached device will be Primary or Secondary.
5. Adjust the settings by clicking the Display Settings (tab) if necessary.
6. Click Apply (and OK to confirm the settings change) and OK (button).
To Enable Extended Desktop Mode:
1. Attach your external monitor to the external monitor port (or TV to the S-Video-Out Port), and turn it on.
2. Go tothe Graphics Properties control panel (see “Intel Graphics Properties” on page B - 3) and click Devices (tab).
3. Click Extended Desktop (icon).
