37
PRESTIGIO P323MW / P373MW
ENG
6.7 Calibration Menu
Press the MENU button to open the OSD main menu. Press the P- button five times to select the calibration icon, then
press OK to open the Calibration menu.
The Calibration menu allows you to use twin-picture mode, i.e., simultaneously displaying of two pictures from two
different input sources on the same screen.
Press the P- or P+ button to select an item in this menu and make your changes. The following table describes all of the
items in this menu.
Item
Description
Operation
H. Position
Adjust the OSD’s horizontal position.
V+ to move toward the right.
V- to move toward the left.
The adjusted value will depend on the screen resolution.
V. Position
Adjust the OSD’s vertical position.
V+ to move upward.
V- to move downward.
The adjusted value will depend on the screen resolution.
Phase
Adjust the A/D sampling phase.
V+ or V- to select and OK to activate your selection.
PIP
Open the PIP submenu.
V+ or V- to select and OK to activate your selection.
Active: activate PIP.
PIP Source: select the sub picture input source.
Position: select sub picture placement between
Top Left, Top Right, Bottom Right, or Bottom Left.
Size: set the size of sub picture to Small, Medium,
or Large.
PIP Sound: allow sub picture sound output.
