Prestigio P200DVD-X, User Manual

Page: 8 / 56

8 PRESTIGIO P200T / PRESTIGIO P200DVD-X
ENG
5 Select Store using the \/ /\ button and then press the > button. And press the \/ /\ button to select the OK.
6 Press the EXIT/CANCEL button to exit the menu.
Program Edit
This function enables you to delete, copy, move or skip the
stored programs.
1 Select the channel to tune using the numeric or channel
buttons.
2 Press the TV.MENU button. The OSD MENU will be dis-
played.
3 Select Setup using the \/ /\ button and then press the >
button.
4 Select Program edit using the \/ /\ button and then press the > button.
Delete a Program
1 Select a program to the deleted with the \/ /\ < > buttons.
2 Press the RED button. The selected program is deleted.
All the following programs are shifted up one position.
Copy a Program
1 Select a program to the copied with the \/ /\ < > buttons.
2 Press the YELLOW button.
All the following programs are shifted down one position.
Moving a Program
1 Select a program to the moved with the \/ /\ < > buttons.
2 Press the GREEN button.
3 Move the program to the desired program number with the \/ /\ < > buttons.
4 Press the GREEN button again to release this function.
Skipping a Program Number
1 Select a program to the skipped with the \/ /\ < > buttons.
2 Press the BLUE button. The skipped program turns to Magenta.
3 Press the BLUE button again to release this function.
When a program number is skipped it means that you will be unable to select it using the \/ /\ button during normal TV
viewing. If you want to select the skipped program, directly enter program number with the number buttons or select it in
the program edit or table menu.
Changing Channel
1 Using the CHANNEL buttons.
Press the PROG \/ /\ buttons to change channels.
You will see all the channels that the TV has memorized.(The TV must have memorized at least three channels.)
2 Using the NUMBER buttons
- To change to single-digit channels(0~9) faster, press “0” before the single digit. Example: For channel 4, press “0”, then “4”.
- To select a channel over 10, press the -/— button first. Example: For channel 42, press “-/—”, then “4”, then “2”.
3 Using the Previous Channel