Prestigio P200DVD-X, User Manual

Page: 23 / 56

23 PRESTIGIO P200T / PRESTIGIO P200DVD-X
ENG
the LCD TV may be fall and get damaged, because the arms are not fixed completely. To reattach the removed stand, use
the stand screws.
• Attach the arms completely.
If the LCD TV becomes detached from the arms, it may cause injury or damage the product.
If the LCD TV is somehow detached accidentally, unplug the power cable from the wall outlet, and contact your service center.
Damage may cause fire or electric shock.
Troubleshooting
If the TV seems to have a problem, first try the following list of possible problems and solutions before contacting a service
center. If none of these troubleshooting tips apply, do not attempt to repair the product yourself. Call your nearest service
center.
• Symptoms that may appear to be a problem
The following symptoms may happen even if the TV has no problem. First try the following list of possible problems and
solutions before contacting a service center. First try the following list of possible problems and solutions. If the symptom
continues, turn the TV off, and call your nearest service center.
Symptom Possible Problem Possible Solution
No picture on the screen, and Power connection problem. Check the power cable connectivity to the power
the power LED does not turn on. con-nector. Press the powers witch again.
The TV is turned on, but there The brightnes s is adjus ted Adjust the brightness and the contrast so that
is no picture on the screen. too low. The fluores cent a picture is displayed brightly. The fluores cent tube
tube is out of order. of a LCD TV has a lifetime of about 50,000 hours .
To replace the fluores cent tube, contact as ervice
center.
An afterimage is generated This is caused by an inherent property of LCD panels. Depending on the number of
when continuously watching valid pixels, there may be black or bright pixels. These will be less than 0.005% of
a still image. the sum of all pixels. This is not a problem.
No picture on the screen. No audio. Discordance between Adjust the input switch location.
the external device jack
and the input switch
button location.
A picture is displayed on the screen, The volume is adjus ted to 0. Turn up the Volume button.
but there is no audio. Mute is active. Pres s the Mute button again.
The audio cable is Check the audio cable connectivity.
disconnected.
Remote control malfunctions. The polarity of the batteries Reins tall the batteries properly.
installed in the remote
control is wrong.
The batteries ins talled in
Replace the batteries with new ones.
the remote control have not
been dis charged completely.
Noise is heard on the radio. This may happen when you Keep some distance between any radios and
use a radio near the TV. the LCD TV.
No color in a color picture. The Color density is Adjust the Color density to 100 or less.
adjusted to 0 or almost 0.