Prestigio P200DVD-X, User Manual

Page: 22 / 56

22 PRESTIGIO P200T / PRESTIGIO P200DVD-X
ENG
- On: When selected, the screen will show angle mark during disc play.
- Off: When selected, no angle mark is shown on the screen.
- You decide which ratings require a password and which ones don’t.
• Screen Saver
- You can select the screen protection function ‘On’ and ‘Off’.
• Last Memory
- Adjusts last memory selections.
• Parental
- The Parental feature is a rating limit system, like movie ratings.
- It works with DVD’s that have been assigned a rating.
- This option lets you determine how your player will react to discs that contain movies that are rated (in the U.S.A., the
Motion Pictures Association of America rates movies as G, PG, PG-13, etc.).
• Default
- If user selects reset from the setup menu, all the value of setup menu will be initialized by factory setting value. (Exception:
Parental level and Password values will not be changed.)
Password Setup
1 Press the SETUP button during stop mode and Press the <>
button to move to Password Setup.
2 Press the \/ /\ button and press the ENTER button.
3 Press the ENTER button again.
4 Enter your old password, and new password in 4 digits.
5 Re-enter new password for confirmation then press the
ENTER button.
Using ARM on the Outer Wall
You can use any wall mount arms manufactured by an office furniture manufacturer. You should take into account the
following conditions.
• They have to comply with VESA Mount Interface 100mm standard.
• They have to able to sustain the weight of the LCD TV.
• They have to be fixed to a position adjustable by hand.
• They have to be adjustable.
• The distance between the screw holes for fixing the arms has to be 100mm. Additionally, refer to the installation manual
supplied with the arms for installation.
• Arm installation procedures Install the arms following the procedures given below.
1. Remove all cables connected to the LCD TV.
2. Lay the LCD TV face down on a flat surface with a cushion or some type of soft material to protect the screen.
3. Using a screwdriver, remove the screws fixing the stand.
4. Install the steel frame of the arms, insert the attached screws into the screw holes of the LCD TV, and then fasten the screws
using a screwdriver.
• Attach the arm to the fixed board first.
• Do not use the handle screws for fixing the stand and the handle screws to fix the arms. Use only the screws attached for
the arms (M4 x 10 screws with a diameter of 4 mm, and a length of 10 mm). If you use the stand screws to fix the arms,