Prestigio Nobile1590W, User Manual

Page: 13 / 195

13 PRESTIGIO NOBILE 1590W
ENG
Ethernet
Your computer is equipped with a 10/100Base-TX or 10/100/1000Base-TX Fast Ethernet network adapter. Connect the
active LAN cable to the RJ-45 LAN port located on the left side of the computer. This allows you to access and transmit
data in the local area network.
Connecting to the Network
Use Unshielded Twisted Pair (UTP) Ethernet cable only.
1. Insert one end of the UTP cable into the network connector until the connector snaps securely into the receptacle.
2. Either connect the other end of the cable to an RJ-45 jack wall outlet or to an RJ-45 port on a UTP concentrator or
hub in the network.
Cabling Restriction for Networks
The following restrictions should be observed for 10/100/1000BASE-TX networks:
The maximum cable run length is 100 meters(m) (328 feet[ft]).
For 100Mbps or 1000Mbps operations, use Category 5 wiring and connections.
Note: Consult Windows manual and / or Novell Netware user’s guide for the software
installation, configuration, operation of the network.
BATTERY POWER & POWER MANAGEMENT
TFT display, central processor, hard disk drive are the major hardware subsystems that consume the most power. Power
management deals how these key components should behave to conserve power. For example, you can have the system
turn off its display after 2 minutes of inactivity to save power. Efficient power management can help you work longer
sessions before having to recharge the battery.
The Battery Pack
Lithium-Ion Battery
Your notebook uses a six-cell or nine-cell (optional) Lithium-Ion battery pack that provides power when you don’t have
access to an AC outlet.
Note: It is necessary that you charge the battery pack for at least 6 hours before using it for the
first time.
Note: In the Standby Suspend mode, a fully charged battery loses its power in roughly 1/2 day
or less. When not being used, the battery’s power will deplete in 1-2 month.
Battery Low-Power Warning
1. Low Battery Warning
Low battery condition occurs when battery power is reduced to 6%. The red battery status LED indicator blinks and the
system beeps once every 16 seconds or so.